No. | Brand | d | J | H | G | C | a | D | R |
L6-37N9Z | Rotek | 25 mm | - | - | - | - | - | 80 mm | - |
L9-46P9Z | Rotek | - | - | - | - | - | - | - | - |
R8-30E3 | Rotek | 130 mm | - | - | - | - | - | 280 mm | - |
L6-37P9ZD | Rotek | 240 mm | - | - | - | 159 mm | - | 360 mm | - |
A9-25N3 | Rotek | 110 mm | - | - | - | - | - | 200 mm | - |
A10-35P1A | Rotek | - | - | - | - | - | - | 160 mm | - |
A10-47E1 | Rotek | - | - | - | - | - | - | 28 mm | - |
A14-89P1 | Rotek | 85 mm | - | - | - | - | - | 130 mm | - |
A14-56P1E | Rotek | - | - | - | - | - | - | 19.7500 in | - |
M7-42P1 | Rotek | - | - | - | - | - | - | - | - |
RKS.061.30.1904 | SKF | - | - | - | - | - | - | - | - |
A10-22E5A | Rotek | - | - | - | - | - | - | - | - |
W13-38P1 | Rotek | 260 mm | - | - | - | - | - | 400 mm | - |
A13-38E1 | Rotek | 35.001 mm | - | - | - | - | - | - | - |
M4-16P4Z | Rotek | 42.863 mm | - | - | - | - | - | 84.988 mm | - |
R8-52E3 | Rotek | - | - | - | - | - | - | - | - |
L6-22E9Z | Rotek | 30 mm | - | - | - | - | - | 62 mm | - |
L6-22N9Z | Rotek | - | - | - | - | - | - | - | - |
A16-56N5 | Rotek | - | - | - | - | - | - | - | - |
RKS.162.20.1904 | SKF | - | - | - | - | - | - | - | - |
A8-30E8D | Rotek | 220 mm | - | - | - | - | - | 340.000 mm | - |
A14-19P4 | Rotek | - | - | - | - | - | - | - | - |
R9-55E3 | Rotek | - | - | - | - | - | - | - | - |
A14-31P3 | Rotek | - | - | - | - | - | - | - | - |
A12-35N5 | Rotek | - | - | - | - | - | - | - | - |
RKS.160.16.1754 | SKF | - | - | - | - | - | - | 3.1510 in | - |
L6-43P9ZD | Rotek | - | - | - | - | - | - | - | - |
A16-86P1 | Rotek | 50.000 mm | - | - | - | - | - | 82.000 mm | - |
R8-42E3 | Rotek | - | - | - | - | - | - | 72 mm | - |
A6-14P3D Rotek Slewing Ring Bearings | d:95 mm; Enclosure:Open; Limiting Speed - Grease:4,800 rpm; da (min):101 mm; Radial Clearance:0.030 to 0.058 mm; Limiting Speed - Oil:5,700 rpm; B:18 mm; Factor fo:16.5; Weight:0.567 kg; Static Load Rating:33,500 N; Dynamic Load Rating:33,500 N; D:130 mm; Configuration:Single Row; Da (max):124 mm; Bore Type:Cylindrical Bore; Fillet Radius/Chamfer:1.1 mm; ra (max):1 mm; |
3R6-49P9 Rotek Slewing Ring Bearings | Series:14000; K - Factor7:1.53; C - Cup Width:15.875 mm; r - Cup Backface To Clear Radius2:3.30 mm; G2 - Heat Generation Factor (Rib-Roller End):9.4; C0 - Static Radial Rating:13900 lbf; Aa - Cage-Cone Backface Clearance:0.5 mm; Design Units:Imperial; Db - Cup Backface Backing Diameter:58.93 mm; C1 - Dynamic Radial Rating (1 million revolutions)5:12300 lbf; Cup Part Number:14274; e - ISO Factor8:0.38; |
A14-18E1L Rotek Slewing Ring Bearings | da (min):105 mm; ra (max):1 mm; d:100 mm; Snap Ring Outside Diameter:130.7 mm; Configuration:Single Row; Factor fo:16.0; r1:0.5 mm; D1 (max):122.6 mm; Dynamic Load Rating:19,600 N; Dx (min):132 mm; Fillet Radius/Chamfer:1 mm; D:125 mm; Enclosure:Single Shield with S; Limiting Speed - Grease:4,800 rpm; Limiting Speed - Oil:5,600 rpm; Da (max):120 mm; Snap Ring Width:1.1 mm; B:13 mm; a (max):2.1 mm; |
M5-36P1 Rotek Slewing Ring Bearings | Nr. of Holes:8; Limiting Speed - Oil:940 rpm; Retainer Material:Machined Brass; D:540 mm; Groove Width A:24 mm; Fillet Radius/Chamfer:4 mm; Static Load Rating:3,900,000 N; Constant e:0.18; Hole Diameter (do):12 mm; Weight:71.400 kg; Axial Load Factor Y0:3.67; Axial Load Factor Y1:3.75; Roller Profile:Symmetric; Configuration:Double Row; Radial Clearance:0.300 to 0.400 mm; Enclosure:Open; Limiting Speed - Grease:750 rpm; |
M4-38P4 Rotek Slewing Ring Bearings | Design Units:Imperial; Series:HH234000; C1 - Dynamic Radial Rating (1 million revolutions)6:259000 lbf; G2 - Heat Generation Factor (Rib-Roller End):62.1; a - Effective Center Location4:-1.04 in; da - Cone Frontface Backing Diameter:6.61 in; B - Cone Width:3.6875 in; C1 - Dynamic Radial Rating (Two-Row, 1 million revolutions)1:451000 lbf; Cage Type:Stamped Steel; Cone Part Number:HH234031; Ca90 - Dynamic Thrust Rating (90 million revolutions)7:37500 lbf; |
A16-86P1 Rotek Slewing Ring Bearings | B - Cone Width:27.700 mm; db - Cone Backface Backing Diameter:59.94 mm; d:50.000 mm; Cg - Geometry Factor:0.0801; G1 - Heat Generation Factor (Roller-Raceway):38.8; Y - ISO Factor9:1.97; C90 - Dynamic Radial Rating (90 million revolutions)4:25000 N; Cage Type:Stamped Steel; C - Cup Width:17.000 mm; Ab - Cage-Cone Frontface Clearance:-3.6 mm; da - Cone Frontface Backing Diameter:55.12 mm; Da - Cup Frontface Backing Diameter:78.00 mm; |
A10-47E1 Rotek Slewing Ring Bearings | Radial Clearance:0.011 to 0.025 mm; Enclosure:Snap Ring Groove wit; Weight:0.024 kg; Snap Ring Outside Diameter:31 mm; a (max):1.4 mm; r1:0.3 mm; Fillet Radius/Chamfer:0.3 mm; Factor fo:13.5; Limiting Speed - Grease:28,000 rpm; Configuration:Single Row; Da (max):26 mm; D:28 mm; Cy (max):1.9 mm; Snap Ring Width:0.9 mm; ra (max):0.3 mm; Dx (min):31.5 mm; Dynamic Load Rating:5,100 N; D1 (max):26.7 mm; |
A14-31P3 Rotek Slewing Ring Bearings | Dimension B:10.5 in; Maximum Speed:1570 rpm; Seal Type:Aluminium Triple Lab; Cor - Static Load Rating:131513 lbf; Bearing UPC:013992059086; Bearing - Housing - Seal UPC:013992045355; Dimension S:3.0 in; Ca - Axial Load Rating:5799.99 lbf; Bearing Type:Split Cylindrical Re; Dimension U:0.3 in; Support Type:Take-Up; Dimension D:15.7 in; Cr - Dynamic Load Rating:94869 lbf; Dimension H:2.1 in; Bearing - Housing - Seal:LSE503BRHATL; |
3R5-44P2A Rotek Slewing Ring Bearings Video