No. | Brand | T | H | A | d | D | B | G | b1 |
Lfr5204-16 | - | - | - | - | 130 mm | - | - | - | - |
(SG20-1/SG25/SG8RS/SG25-1/SG35/SG12RS/SG15N/SG20N/SG25N/SG35N) | - | - | - | - | - | - | - | - | - |
(LFR5201-14KDD/R5201-14KDD/LV203ZZ/LV204-57ZZ/SG15-10/SG15-1/SG20/SG6RS/FR10Z/FR15/FR15Z/FR20) | - | - | - | - | - | - | - | - | - |
LFR5206-25NPP,NPP | - | - | 169.863 mm | - | - | - | - | - | - |
Lfr5206-25kdd | - | - | - | - | - | - | - | - | - |
Lfr5206-25kdd | - | - | - | - | - | - | 2.1250 in | - | - |
Lfr5206-25 | - | - | - | - | - | - | - | - | - |
(LFR5206-25KDD | - | - | - | - | 20 mm | 42 mm | 12 mm | - | - |
LFR5201-12KDD/R5201-12KDD | - | - | - | - | 360 mm | - | - | - | 9.4 mm |
LFR5206-25KDD,KDD | - | - | - | - | 300 mm | - | - | - | - |
Lfr5206-20 | - | - | - | - | - | - | - | - | - |
Lfr5204-16kdd | - | - | - | - | - | - | - | - | - |
Lfr50/4-4npp, | - | 17 mm | - | - | - | 80 mm | 17 mm | - | - |
(LFR5206-20KDD | - | - | - | - | - | - | - | - | - |
Lfr5206-20kdd, | - | - | - | - | - | - | 21 mm | - | - |
Rku65 | - | - | - | - | 70 mm | - | 20 mm | - | - |
LFR5206-25NPP, | - | - | - | - | 220 mm | 460 mm | - | - | - |
Sg10/Sg15/Sg5RS/Sg15-10/Sg15-1/Sg20/Sg6RS/Sg20-1/Sg25/Sg8RS | - | - | - | - | - | 4.1250 in | - | - | - |
Lfr5208-40kdd, | - | - | - | - | - | 120 mm | - | - | - |
Lfr5207-30kdd, | - | - | - | - | - | - | - | - | - |
Lfr5206-20npp | SKF | - | - | - | - | 3.3465 in | - | - | - |
Lfr5206-25 Double Row Ball Bearing | e - ISO Factor8:0.39; Cone Part Number:EE107060V; Cg - Geometry Factor:0.116; db - Cone Backface Backing Diameter:181.1 mm; K - Factor7:1.51; Design Units:Imperial; da - Cone Frontface Backing Diameter:170.94 mm; Aa - Cage-Cone Backface Clearance:6.9 mm; Ab - Cage-Cone Frontface Clearance:3.8 mm; Cage Type:Stamped Steel; |
Guide Bearing, track roller, LFR5206-25NPP,NPP | A2:126.603 mm; Lock nut:AN 16; P120°:30.2 kN; ba:30.163 mm; Labyrinth ring (db shaft position):LOR 82; Stabilizing ring:2 x SR-1516; H:169.863 mm; H1:88.9 mm; P150°:26.7 kN; P180°:31.6 kN; |
U22/T22 Track Roller with Gothic Arch Groove-Type Sg Sg10/Sg15/Sg5RS/Sg15-10 /G15-1/Sg20/Sg6RS/Sg20-1/Sg25/Sg8RS/Sg25-1/Sg35/Sg12RS | Locking device:MS 3196; A:6.5 mm; G3:12 mm; B:75 mm; d3:620 mm; d:480 mm; B1:397 mm; Lock nut:HM 3196; B5:95 mm; d1:450 mm; |
The Guide Pulley Lfr50/4-4npp, Lfr50/4-4 2RS 4*13*6mm Bearing | Mass bearing:0.28 kg; d1 ≈:68.8 mm; Cb min.:3 mm; T:17 mm; db min.:62.5 mm; Calculation factor Y:1.9; B:17 mm; Reference speed:6300 r/min; D:80 mm; ra max.:1 mm; |
Guide Bearing LFR5206-20KDD, LFR5206-10NPP, LFR5206-10, LFR5206 | Inside Ring Width B:23.83 mm; Height H2:61.9 mm; Opening Width N1:15.9 mm; Housing Style:Take-Up; Shaft Length L1:72.2 mm; Dynamic Load Rating:4850 lbf; Series:Standard; Static Load Rating:2530 lbf; Opening Height N2:36.5 mm; Shaft Size d:1 3/16 in; |
Lfr5206-25kdd R5206-25zz Lfr Series Guide Roller Bearings | Da:215.001 mm; Ca:67.793 mm; A1:120.65 mm; Cap bolt recommended tightening torque:400 N·m; A2:187.325 mm; Initial grease fill:379.89 g; Labyrinth ring:2 x LOR 114; P150°:66.7 kN; da:107.95 mm; Stabilizing ring:SR-24-20; |
Double Row Track Roller Bearing (SG20-1/SG25/SG8RS/SG25-1/SG35/SG12RS/SG15N/SG20N/SG25N/SG35N) | Cone Part Number:46162; db - Cone Backface Backing Diameter:2.05 in; Ca90 - Dynamic Thrust Rating (90 million revolutions)7:5190 lbf; K - Factor8:1.45; Cage Type:Stamped Steel; a - Effective Center Location4:-0.31 in; G1 - Heat Generation Factor (Roller-Raceway):44.4; Aa - Cage-Cone Backface Clearance:0.06 in; da - Cone Frontface Backing Diameter:2.01 in; Cg - Geometry Factor:0.092; |
Lfr5206-20kdd, Black Oxide Finish, Track Roller Bearing | Radial Clearance:0.035 to 0.060 mm; Enclosure:Open; B:21 mm; db (max):27 mm; Dynamic Load Rating:42,000 N; dd (min):33 mm; Da (max):45 mm; Bore Type:Cylindrical Bore; ra1 (max):0.6 mm; r1:0.6 mm; |
Sg10/Sg15/Sg5RS/Sg15-10/Sg15-1/Sg20/Sg6RS/Sg20-1/Sg25/Sg8RS Series Track Roller Bearing Lfr50/4npp/R50/4npp/Lfr50/5-4kdd/R50/5-4kddlfr50 | Series:HM807000; K - Factor2:1.2; D1 - Flange Outer Diameter:4.5 in; Design Units:Imperial; C1 - Cup Flange Width:0.3125 in; Y - ISO Factor4:1.23; D:4.1250 in; Cup Part Number:HM807010-B; C - Cup Width:1.1250 in; Cg - Geometry Factor5:0.076; |
Lfr/R U/Arch-Groove Double Row Angular Contact Ball Guide Roller Bearing Lfr5204-16 R5204-16 Lfr5206-20 R5206-20 Lfr5206-25 R5206-25 Npp -Kdd -Zz -2RS | Da (max):216 mm; db (min):144 mm; Bore Type:Cylindrical Bore; ra1 (max):2.5 mm; dd (min):168 mm; dc (min):158 mm; Radial Clearance:0.100 to 0.145 mm; Limiting Speed - Oil:3,000 rpm; d:130 mm; Fillet Radius/Chamfer:3 mm; |
LFR5201-12KDD/R5201-12KDD LFR Series V groove track roller guide bearing(LFR5201-12NPP/R5201-12NPP/LFR5201-14KDD/R5201-14KDD/LFR5201-14NPP/R5201-14NPP/LFR5301K) Video